Synthesis of poly(vinyl propionate) from poly(vinyl alcohol) in nonaqueous medium using ethyl nitrate dimethyl sulfoxide as a catalyst

Poly(vinyl alcohol) (PVA) can be dissolved in a nonaqueous medium in the presence of catalytic concentration of ethyl nitrate dimethyl sulfoxide, C₂H₅ONO₂·DMSO. From the PVA solution, poly(vinyl propionate), PVPR was prepared by the homogeneous esterification of PVA with propionic acid. The ester thus formed contained some unconverted hydroxyl group. The formation of the ester was confirmed by the IR and ¹H‐NMR spectra. The molecular weight of the ester was determined by GPC and intrinsic viscosity (η) was determined by viscometric method. Glass transition temperature, T_g, was obtained from differential scanning calorimetric (DSC) analysis. Thermal stabilities of the ester were checked by thermogravimetric analysis (TGA) and differential thermogravimetric (DTG) analysis. The efficiency of the ester as a flow improver of crude oil was also examined. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5675–5679, 2006     

两钠尾气分离器的技术改造

对直接法生产两钠(硝酸钠和业硝酸钠)的工艺过程作了简介，分析了原设计中尾气分离装置存在的缺陷，对尾气分离装髓进行了改造并取得了良好的效果。     

Kinematic viscosity of biodiesel components (fatty acid alkyl esters) and related compounds at low temperatures

Biodiesel, defined as the mono-alkyl esters of vegetable oils and animal fats is, has undergone rapid development and acceptance as an alternative diesel fuel. Kinematic viscosity is one of the fuel properties specified in biodiesel standards, with 40 °C being the temperature at which this property is to be determined and ranges of acceptable kinematic viscosity given. While data on kinematic viscosity of biodiesel and related materials at higher temperatures are available in the literature, this work reports on the kinematic viscosity of biodiesel and a variety of fatty acid alkyl esters at temperatures from 40 °C down to −10 °C in increments of 5 °C using the appropriately modified standard reference method ASTM D445. Investigating the low-temperature properties of biodiesel, including viscosity, of biodiesel and its components is important because of the problems associated with the use of biodiesel under these conditions. Such data may aid in developing biodiesel fuels optimized for fatty ester composition. An index termed here the low-temperature viscosity ratio (LTVR) using data at 0 °C and 40 °C (divide viscosity value at 0 °C by viscosity value at 40 °C) was used to evaluate individual compounds but also mixtures by their low-temperature viscosity behavior. Compounds tested included a variety of saturated, monounsaturated, diunsaturated and triunsaturated fatty esters, methyl ricinoleate, in which the OH group leads to a significant increase in viscosity as well as triolein, as well as some fatty alcohols and alkanes. Esters of oleic acid have the highest viscosity of all biodiesel components that are liquids at low temperatures. The behavior of blends of biodiesel and some fatty esters with a low-sulfur diesel fuel was also investigated.     

Transformations and losses of fertilizer nitrogen on no-till and conventional till soils

A field study was conducted in 1982 to measure the effect of no-till (NT) and conventional till (CT) systems on N transformation after surface and subsurface applications of N fertilizers. Urea, urea-ammonium nitrate (UAN) solution, (NH₄)₂SO₄ (AS), and CA(NO₃)₂ were applied to NT and CT plots (5.95 m²) at a rate of 448 kg N ha^–1. A comparison of fertilizer N recovered in soils receiving incorporated or surface applied N was used to estimate NH₃ volatilization while denitrification was estimated from fertilizer N recovered in the presence and absence of nitrapyrin with incorporated N. Immobilization was assessed in microplots (0.37 m²) after surface application of (¹⁵NH₄)₂SO₄ to NT and CT systems at a rate of 220 kg N ha^–1.The results indicate little difference between NT and CT systems on urea hydrolysis rates and immobilization of surface applied fertilizer N. Approximately 50% and 10% of the surface applied N was recovered in the inorganic and organic fractions, respectively, on both tillage systems. The N not recovered was likely lost from plot areas through soil runoff. Incorporation of UAN, urea and AS resulted in 20 to 40% greater inorganic N recovery than from surface application. Nitrification rates were greater under the NT than the CT system. The similarities in concentration in the various N pools observed between the two tillage systems may be partially due to the short length of time that NT was imposed in this field study (<1 year) since other researchers using established tillage systems (>5 y) indicate that NT tends to promote decreased efficiency of fertilizer N.     

Fatty acid esters with short‐chain alcohols in two‐phase olive pomace oils

Two‐phase decanter olive pomace (TPOP) is the by‐product of a centrifugation system, used to produce olive oil, that separates olive oil and moist pomace. The water content in these olive pomaces is about 70%, while it was 45‐50% in the olive pomace stemming from three‐phase systems (oil, water, and pomace) and 30% in the old press system. The aim of this work is focused on quantification and changes undergone during olive pomace storage in ponds of esters of fatty acids with short‐chain linear alcohols, which can be considered as a refining loss. The results indicate that oil deterioration increases very rapidly, in particular when oil is extracted from the TPOP surface. Special attention should be paid to the storage of TPOP, establishing a maximum of 2 months in all cases.     

Properties of alkyl esters base on castor oil

Castor oil is a non‐traditional raw material for the preparation of methyl and ethyl esters of higher fatty acids as alternative fuels for diesel engines. Castor oil contains ricinoleic acid (12‐hydroxy octadecene acid) with a major share of about 90%. The article presents the parameters of castor oil‐based methyl esters (COME) and ethyl esters (COEE) defined by the standard EN 14 214. The densities of COME and COEE are higher than the limit defined by the standard EN 14 214. The viscosities are more than twice as high as the limit value. The cetane numbers are lower than defined by the standard EN 14 214. For the remaining parameters, COME and COEE meet, in principle, the standard EN 14 214. The presence of the free hydroxyl group has virtually no effect on the values of such parameters as carbon residue, filterability at low temperatures and oxidation stability, for which some influence was expected. The physicochemical parameters of the castor oil esters are discussed in comparison to the analogous esters of high‐oleic sunflower oil, which contain about 80% of oleic acid. Both the methyl and ethyl esters of high‐oleic sunflower oil meet the standard EN 14 214 in all prescribed parameters.     

Chemistry of mandibular and Dufour's gland secretions of ants in genusMyrmecocystus

Males of several species ofMyrmecocystus produce mandibular gland secretions that contain 2,4-dimethyl-2-hexenoic acid and a variety of monoterpenes that include neral, geranial, citronellol, limonene, and 2,6-dimethyl-5-hepten-1-ol. Other components identified include methyl anthranilate, octanal, octanol, octyl octanoate, and 2-hexyl-2-decenal. Methyl salicylate has been identified as a mandibular gland constituent of workers of several species in addition to mellein and monoterpenes such as cymene, limonene, and the isomers of citral. The Dufour's gland secretions of workers and females of 14 species contain typical formicine alkanes (e.g., undecane), 2-alkanols (e.g., 2-tridecanol), and 2-alkanones (e.g., 2-tridecanone). Two species in the subgenusEremnocystus produce secretions that are distinguished by the presence of significant quantities of tridecyl esters. The functions of these compounds as well as their possible chemosystematic significance in the genusMyrmecocystus are discussed.     

Variation in fatty acid composition of the different acyl lipids in seed oils from fourSesamum species

Seeds from different collections of cultivatedSesamum indicum Linn. and three related wild species [specifically,S. alatum Thonn.,S. radiatum Schum and Thonn. andS. angustifolium (Oliv.) Engl.] were studied for their oil content and fatty acid composition of the total lipids. The wild seeds contained less oil (ca. 30%) than the cultivated seeds (ca. 50%). Lipids from all four species were comparable in their total fatty acid composition, with palmitic (8.2–12.7%), stearic (5.6–9.1%), oleic (33.4–46.9%) and linoleic acid (33.2–48.4%) as the major acids. The total lipids from selected samples were fractionated by thin-layer chromatography into five fractions: triacylglycerols (TAG; 80.3–88.9%), diacylglycerols (DAG; 6.5–10.4%), free fatty acids (FFA; 1.2–5.1%), polar lipids (PL; 2.3–3.5%) and steryl esters (SE; 0.3–0.6%). Compared to the TAG, the four other fractions (viz, DAG, FFA, PL and SE) were generally characterized by higher percentages of saturated acids, notably palmitic and stearic acids, and lower percentages of linoleic and oleic acids in all species. Slightly higher percentages of long-chain fatty acids (20∶0, 20∶1, 22∶0 and 24∶0) were observed for lipid classes other than TAG in all four species. Based on the fatty acid composition of the total lipids and of the different acyl lipid classes, it seems thatS. radiatum andS. angustifolium are more related to each other than they are to the other two species.     

Synthesis and characterization of butyl acrylate graft sodium salt of partially carboxymethylated starch

Graft copolymers were synthesized by graft copolymerization of butyl acrylate (BA) onto sodium salt of partially carboxymethylated starch (Na‐PCMS). Ceric ammonium nitrate (CAN), a redox initiator, was used for initiation of graft copolymerization reaction. All the experiments were run with Na‐PCMS having degree of substitution, DS = 0.35. The grafting reaction was characterized by parameters such as % total conversion (%Ct), % grafting (%G), % grafting efficiency (%GE), and % add‐on. Graft copolymers were characterized by infrared spectral analysis and scanning electron microscopy. Variables affecting graft copolymerization reaction such as nitric acid concentration, reaction time, reaction temperature, and ceric ion concentration were investigated. The results revealed that 0.3M CAN as initiator, 0.3M HNO₃, with reaction time 4–4.5 h at 25–30°C were found as suitable parameters for maximum yield of graft copolymerization reaction. © 2006 Wiley Periodicals, Inc. JAppl Polym Sci 102: 3334–3340, 2006     

Analysis of epoxidized soybean oil by gas chromatography

A fast and cost-effective procedure to quantitate epoxidized soybean oil by means of an external standard method is reported. This procedure is applicable to commercial epoxidized oils, polymer additive packages and polymers—polyvinyl chloride (PVC)—containing epoxidized oils. The epoxidized soybean oil is converted into fatty acid methyl esters with tetramethylammonium hydroxide, and analyzed by capillary gas chromatography with flame-ionization detection. In PVC samples, the epoxidized soybean oil was extracted with toluene and followed by derivatization prior to analysis. The methyl esters of monoepoxyoctadecanoic, diepoxyoctadecanoic and triepoxyoctadecanoic acid were separated with a short capillary column.